One for All Universal Remote URC 8910 User Manual

A/V LCD 8-DEVICE WITH LEARNING  
UNIVERSAL REMOTE CONTROL (URC-8910)  
User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
The One For All A/V LCD 8-Device With Learning Universal Remote  
Control (URC-8910) is our latest high-performance universal  
remote control. It is designed to operate up to eight home entertain-  
ment devices, including TV, video, and audio components. Moreover,  
this remote control contains sophisticated technology that will allow  
you to conveniently consolidate the clutter of all of the original  
remote controls used in your home entertainment system. It’s  
packed with easy-to-use features such as:  
• Advanced Liquid Crystal Display (LCD) with 15 alphanumeric  
characters, real-time clock, and icons for constant visual feedback  
of operations and programming sequences  
• A unique Home Theater mode that combines different device  
controls under one mode for operating convenience  
• Three macro keys for instant activation of favorite key sequences  
• Four learning keys to capture unique functions from your  
devices’ original remote controls  
Key Mover for copying keys from one device to another, or to a  
different position in the same mode  
Code Search to help you program device codes without using the  
code list (starting on page 14) or for brands or models not listed  
Favorite Channel Scan for easy channel surfing  
• Mode reassignment to control duplicate types of devices  
Volum e Lo ck to assign volume controls to individual devices or to  
one global device  
Commercial Skip feature allows you to channel surf during  
commercial interruptions of your favorite programs  
• Pre-programmed database with the world’s largest and most  
efficient group of infrared codes insures device compatibility  
• Internal modem for upgrading device codes over the telephone  
• A low battery icon to notify you when batteries are getting low  
• Backlighting feature to aid operation in low ambient light  
The One For All A/V LCD 8-Device With Learning Universal Remote  
Control (URC-8910) requires four (4) new AAA alkaline batteries  
(not included) and easy programming to control your devices. For  
best results, please read and perform all instructions listed here.  
Also, keep these instructions for future reference.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLING BATTERIES  
1.  
2.  
On the back of the URC-8910 remote control, push  
the tab and lift off the battery cover.  
Obtain four (4) new AAA alkaline batteries. Match  
the + and – marks on the batteries to the + and –  
marks in the case, and then insert the new batteries.  
3.  
4.  
Align the cover key with the case opening and  
replace the cover until it locks.  
If batteries are inserted correctly, the entire LCD  
will turn on.After 5 seconds of inactivity, the remote  
control will turn itself off to conserve battery life.  
5.  
Perform the steps in Setting The Clock (on the next  
page) to set the correct time.  
NOTE: When a battery icon appears in the display (see page 7, Key Charts,  
LCD), the batteries are low. Simply replace them and the URC-8910 remote  
control will be restored to full functionality, complete with your favorite settings.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE CLOCK  
1.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the default  
device and time to [CODE SET].  
NOTE: Default values for device, its code, and time are  
shown above.Your remote control settings may be different.  
NOTE: If you wish to exit the programming mode at any  
time, press EXIT once. You will see an [EXIT] message as the  
remote control returns to normal operation.  
NOTE: If you see an [INVALID] message, you have inadver-  
tently pressed an incorrect key. Simply note your error and  
continue programming.  
2.  
3.  
(x 5) Press the L key five times until you see the display  
change to [CLOCK SET].  
NOTE: If you go past [CLOCK SET], press the M key one or  
more times to return to it.  
Press SELECT once to begin programming.You will  
see the display change to the current time.  
4.  
5.  
6.  
Press the L key one or more times until you see the  
desired hour (a.m. or p.m.).  
Press the M key one or more times until you see the  
desired minute.  
Once the time is correctly set, press SELECT once to  
accept the values. The display will confirm your  
entry with [SUCCESS] and then [EXIT SETUP].  
The URC-8910 remote control will return to  
normal operation.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES AND FUNCTIONS  
Use the illustration below to locate features on the URC-8910 remote  
control and then study the Key Charts (on the next three pages) to  
learn how they function.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key Charts  
The LED (red light) blinks to show that the  
remote control is working and sending signals.  
The LCD (Liquid Crystal Display)  
provides 15 alphanumeric charac-  
ters that display status messages  
during remote control operation  
and programming.Also, one or  
more icons appear in the LCD to  
indicate the following conditions:  
or  
Morning or Afternoon Time  
Low Battery  
IR Signal Transmission  
Press TV, VCR, DVD, AUX, SAT, CBL,  
RCVR/AMP, or CD once to select a  
desired home entertainment  
device to control.  
After programming, press HOME  
THEATER once to select the home  
theater mode. See Using The Home  
Theater Mode on page 43.  
Press POWER once to turn on or off the  
selected device.  
Use the cursor keys (L, M, , or ) to move  
the cursor in the program guide and menu  
screens. Use SELECT to choose options from  
your selected device’s menu or guide.  
In the CD mode, use SELECT to select a  
compact disc. Use L (or M) to select the next  
(or previous) CD. Use (or ) to select the  
next (or previous) track.  
In the RCVR/AMP mode, use SELECT to  
set the surround sound. Use L (or M) to  
adjust the volume higher (or lower). Use  
(or ) to adjust the balance left (or right).  
Press MENU once to display your selected  
device’s main menu.  
Use GUIDE to display your selected device’s  
program guide or setup menu.  
continued on next page...  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES AND FUNCTIONS  
Key Charts (continued)  
Use EXIT to exit from your selected device’s  
guide or menu.  
Use INFO to display the current channel and  
program information.  
Use VOL+ (or VOL-) to raise (or lower) the  
audio volume.  
Press MUTE once to turn the audio off  
or on.  
In the TV, VCR, DVD, SAT, and CBL modes,  
use FAV to scan favorite channels and/or all  
channels. See Using Channel Scan and Program-  
ming Favorite Channel Scan on page 41.  
Use CH+ (or CH-) to select the next higher (or  
lower) channel.  
Press PREV once to recall the last-viewed  
channel and to page back one screen on the  
main menu.  
In the CD mode, use PREV to turn random  
play on or off.  
In the RCVR/AMP mode, use PREV to select  
the receiver band.  
Use the keypad (1 ~ 9 and 0) to  
directly select channels (e.g., 009 or  
031).  
In the RCVR/AMP mode, use the  
keypad (1 ~ 9 and 0) to select audio  
sources 1 through 10.  
Press ENTER once after entering the channel  
numbers on some TVs.  
In the CD mode, use ENTER to add 10 to the  
digit entry (e.g., ENTER and 7 is 17).  
Use TV/VID to switch the TV’s input to view  
TV or video programs.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use the transport keys to control your  
VCR, DVD or CD player, or VOD (Video  
On Demand) if available on your cable  
or satellite service.  
To record a VCR program, press REC  
twice.  
Use SLEEP to activate your device’s sleep  
timer (not available for all devices).  
After programming, press M1 ~ M3 once to  
run a desired macro (see Using Macros on  
page 34).  
After programming, press L1 ~ L4  
once to activate a learned function.  
See Using Learning on page 30.  
Use PIP to switch the Picture-In-Picture  
feature on or off (if available on your TV).  
Use MOVE to move the window picture  
to different positions in the main picture.  
Use SWAP to switch images and sound  
between the main and window pictures.  
After programming, use COM SKIP to skip  
commercials on selected devices (i.e., TV, VCR,  
DVD, CBL, and SAT). See Using Commercial  
Skip on page 48.  
Use to turn on or off the key backlight.  
When this feature is activated, keys will  
remain backlit for 5 seconds after the last key  
press. In the setup mode, backlighting  
will remain on for 30 seconds.  
Use SET for all programming sequences.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAMMING DEVICE CONTROL  
The URC-8910 remote control is preprogrammed at the factory to  
operate an RCA TV and VCR, a Motorola (GI) cable converter, an RCA  
satellite receiver, a Pioneer CD player, a Toshiba DVD player, a Pioneer  
audio receiver/ amplifier, and a One For All home automation device.  
To control devices other than the default brands, perform the follow-  
ing steps and repeat them as needed for each device to be pro-  
grammed; otherwise skip this section:  
NOTE: For TV/VCR Combo control, see “Programming TV/VCR Combo  
Control” on page 12.  
1.  
Turn on a device (e.g.,VCR or DVD player) and, if  
applicable, insert media (e.g., cassette or disc).  
NOTE: Please read steps 2 through 8 completely before  
proceeding. Highlight or write down the codes and device  
you wish to program before starting step 2.  
2.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the cur-  
rent device and time to [CODE SET].  
NOTE: The device, its code, and time are examples. Your  
remote control settings may be different.  
NOTE: To exit programming at any time, press EXIT once or  
allow 30 seconds of inactivity to lapse. You will see [EXIT  
SETUP] as the remote control returns to normal operation.  
NOTE: [INVALID] means you have inadvertently pressed an  
incorrect key. Note your error and continue programming.  
3.  
4.  
Press SELECT once to begin programming.You will  
see the display change to the last-selected device  
and its current code (e.g., TV and 0051).  
Press a desired device key once (e.g., VCR).You will  
see the display change to the desired device and its  
current code (e.g., VCR and 0035).  
NOTE: Use the AUX key to program control of home  
automation devices, video accessories, audio services, and  
other audio or video devices. Alternately, use the AUX key to  
program control of a second device type (e.g., a second VCR;  
see “Re-assigning Device Keys” on page 37).  
5.  
Use the Manufacturer’s Codes (starting on page 14)  
to locate the type of device and brand name. Then  
use the keypad to enter the first four-digit code for  
your device and press SELECT once.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For example, to enter the first GE VCR code (on  
page 24), press 0 twice, 6 once, 0 once, and then  
SELECT once.  
If the code is entered correctly, you will see the  
[SUCCESS] message.  
6.  
7.  
Press EXIT to exit the programming mode.You will  
see an [EXIT SETUP] message as the URC-8910  
remote control returns to normal operation.  
To verify the code works, aim the URC-8910 remote  
control at the desired device, press its device key  
once and then press POWER once. The device should  
turn off. If it does not respond, repeat steps 2  
through 6, trying each code for your brand until you  
find one that works. If it still does not work, try  
Searching For Your Code on page 27.  
NOTE: If the device does not have a POWER key, press the  
(Play) key.  
8.  
Repeat steps 1 through 7 for each device you want  
to control. For future reference, write down each  
working device code in the boxes below:  
TV Code:  
VCR Code:  
DVD Code:  
SAT Code:  
CBL Code:  
RCVR/AMP  
Code:  
CD Code:  
AUX Code:  
Aux. Device  
Type:________________________________  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAMMING TV/VCR COMBO CONTROL  
Perform the following instructions to control a TV/VCR Combo:  
1.  
Turn on the TV/VCR Combo and insert a video  
cassette.  
NOTE: Please read steps 2 through 9 completely before pro-  
ceeding. Highlight or write down the codes and device you  
wish to program before starting step 2.  
2.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the cur-  
rent device and time to [CODE SET].  
NOTE: The device, its code, and time are examples.Your  
remote control settings may be different.  
NOTE: To exit programming at any time, press EXIT once or  
allow 30 seconds of inactivity to lapse. You will see [EXIT  
SETUP] as the remote control returns to normal operation.  
NOTE: [INVALID] means you have inadvertently pressed an  
incorrect key. Note your error and continue programming.  
3.  
Press SELECT once to begin programming.You will  
see the display change to the last-selected device  
and its current code (e.g., TV and 0051)  
4.  
5.  
Press VCR once.You will see the display change to  
[VCR] and its current code.  
Use the Setup Codes For TV/VCR Combos (on  
page 22) to locate the type of device and brand  
name. Then use the keypad to enter the first four-  
digit code for your device and press SELECT once.  
For example, to enter the first Sony TV/VCR Combo  
code on page 23, press 0 four times and then  
SELECT once.  
If the code is entered correctly, you will see the  
[SUCCESS] message.  
NOTE: If your TV/VCR Combo has a separate TV code, you  
will also need to perform step 6.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.  
(Optional) Skip this step if your TV/VCR Combo  
does not have a separate TV code. Otherwise, press  
TV once.You will see the display change to [TV] and  
its current code.  
Use the keypad to enter the separate TV code for  
your device.  
7.  
8.  
Press EXIT to exit the programming mode.You will  
see [EXIT SETUP] as the URC-8910 remote control  
returns to normal operation.  
To verify the code works, aim the URC-8910 remote  
control at the desired device, press VCR once and  
then press POWER once. The TV/VCR Combo  
should turn off. If it does not respond, repeat steps 2  
through 8, trying each code for your brand until you  
find one that works. If it still does not work, try  
Searching For Your Code on page 27.  
NOTE: If the device does not have a POWER key, press the  
(Play) key.  
NOTE: For VCR/TV Combos programmed with separate TV  
codes, TV volume is controlled by pressing VCR first and  
then TV. After that, use VOL+ (or VOL-) to raise (or lower)  
the TV volume. For other alternatives on controlling volume  
keys, see “Changing Volume Lock” on page 32 or “Using  
Keymover” on page 38.  
9.  
For future reference, write down the working  
TV/VCR combo code in the below boxes:  
TV/VCR Code:  
TV Code  
(if used):  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SEARCHING FOR YOUR CODE  
If your device does not respond to the URC-8910 remote control  
after trying all codes listed for your brand, or if your brand is not  
listed at all, try manually searching for your code.  
For example, to manually search for a code for your TV:  
1.  
2.  
Turn on the TV.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the  
current device and time to [CODE SET].  
NOTE: The device, its code, and time are examples. Your  
remote control settings may be different.  
NOTE: To exit programming at any time, press EXIT once or  
allow 30 seconds of inactivity to lapse. You will see [EXIT  
SETUP] as the remote control returns to normal operation.  
NOTE: [INVALID] means you have inadvertently pressed an  
incorrect key. Note your error and continue programming.  
3.  
Press the M key once until you see the display  
change to [MAN SEARCH].  
NOTE: If you go past [MAN SEARCH], press the L key one or  
more times to return to it.  
4.  
5.  
Press SELECT once to begin programming.You will  
see the display change to the last-selected device  
and its code (e.g., VCR and 0035).  
Press a desired device key once (e.g., TV).You will  
see the display change to the desired device and the  
first code in the manual search list (e.g., TV and  
0047).  
6.  
Aim the URC-8910 remote control at the device  
(e.g., TV) and press SELECT once.You will see the  
LED (red light) blink and the  
(IR) icon flash  
indicating IR codes are being transmitted.  
continued on next page...  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SEARCHING FOR YOUR CODE (continued)  
NOTE: In the manual search mode, the URC-8910 remote  
control will send IR codes from its library to the selected  
device, starting with the most popular code first.  
7.  
If the device (e.g., TV) turned off, skip to the next  
step. If it did not turn off, aim the URC-8910 remote  
control at the device (e.g., TV) and press the L key  
once to advance the manual search to the next code  
(e.g., TV and 0054).Again you will see the LED (red  
light) blink and the  
(IR) icon flash.  
Repeat this step as often as needed until you find a  
code that turns off the device.  
8.  
To save the working code, press SELECT once. The  
display will confirm your entry with [SUCCESS] and  
then [EXIT SETUP].  
The URC-8910 remote control will return to  
normal operation.  
NOTE: For future reference, write down the working device  
code in the appropriate boxes on page 11.  
9.  
To perform a manual code search for another  
device, repeat steps 1 through 8, but this time (in  
step 5) substitute the appropriate device key for the  
device you are searching for.  
NOTE: If you have not found a working device code after trying the above  
procedure, please contact our customer service center to upgrade your  
One For All A/V LCD 8-Device With Learning Universal Remote Control  
(URC-8910). See About Upgrading” on page 51.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING LEARNING  
Program the learning keys (L1~ L4) to add functions that are  
unique to your home entertainment devices (e.g.,VCR Tracking Up  
or Down). However, there are some considerations:  
Your original remote control must be in working order for the  
learning feature to work properly.  
• Learned keys are mode specific, so each one can store a unique  
function for each mode.  
• Learned keys can be used in macros (see Using Macros on page 34).  
• Although dedicated keys (L1~ L4) are provided for storing  
learned functions, you can also use any key (except keys for  
devices and programming) for learning. However, using them as  
learned keys will overwrite their original functions.  
• For optimum learning, avoid high levels of ambient light such as  
natural sunlight or energy-efficient fluorescent lights.  
NOTE: Please have your original remote controls handy before programming  
learning. Be sure to press each key within 5 seconds of the previous entry.  
If not, the URC-8910 remote control will exit the programming mode.  
Programming A Learning Key  
1.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the cur-  
rent device and time to [CODE SET].  
NOTE: The device, its code, and time are examples. Your  
remote control settings may be different.  
NOTE: To exit programming at any time, press EXIT once or  
allow 30 seconds of inactivity to lapse. You will see [EXIT  
SETUP] as the remote control returns to normal operation.  
NOTE: [INVALID] means you have inadvertently pressed an  
incorrect key. Note your error and continue programming.  
2.  
3.  
(x 2) Press the M key twice until you see the display  
changes to [IR LEARN].  
NOTE: If you go past [IR LEARN], press the L key one or  
more times to return to it.  
Press SELECT once to begin programming.You will  
see the display change to the last-selected device  
(e.g., TV).  
continued on next page...  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING LEARNING  
Programming A Learning Key (continued)  
4.  
Press a device key once (e.g., TV) to assign a desired  
mode for learning.  
5.  
Select an open learning key (e.g., L1) and press it  
once.You will see the display change to [LEARNING]  
and the LED (red light) will turn on for 5 seconds.  
6.  
Place your original remote control (e.g., TV remote  
control) head-to-head (about 2" apart) from the  
URC-8910 remote control.  
2"  
7.  
On your original remote control, press and hold the  
key (i.e., feature) to be learned until until you see  
[SUCCESS] appear on the URC-8910 remote control.  
The display will return to device mode you selected  
for learning (e.g., TV).  
If the key was not learned, you will see an [ERROR]  
message instead.  
Repeat steps 5 through 7 as needed to achieve  
[SUCCESS].  
8.  
9.  
To learn functions onto other learning keys (e.g., L2  
~ L4), repeat steps 4 through 7 for each key.  
Press EXIT to exit the programming mode.You will  
see an [EXIT SETUP] message as the remote control  
returns to normal operation.  
10.  
To test a learned feature, aim the URC-8910 remote  
control at the desired device and press its device key  
once (e.g., TV, where the learning mode was  
assigned). Then press the learning key (e.g., L1)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
where the learned feature is stored. The feature  
should activate. If not, try the programming the  
learning key again, starting with step 1 (on page 29).  
Deleting A Function From A Learning Key  
1.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the cur-  
rent device and time to [CODE SET].  
NOTE: The device, its code, and time are examples. Your  
remote control settings may be different.  
NOTE: To exit programming at any time, press EXIT once or  
allow 30 seconds of inactivity to lapse. You will see [EXIT  
SETUP] as the remote control returns to normal operation.  
NOTE: [INVALID] means you have inadvertently pressed an  
incorrect key. Note your error and continue programming.  
2.  
3.  
(x 3) Press the M key three times until you see the display  
change to [IR DELETE].  
NOTE: If you go past [IR DELETE], press the L key one or  
more times to return to it.  
Press SELECT once to begin programming.You will  
see the display change to the last-selected device  
(e.g., TV).  
4.  
5.  
Press a device key once (e.g., TV) for the mode that  
contains the learned function.  
Press learning key once (e.g., L1) where the feature  
(to be deleted) is stored.You will see the display  
change to [DELETED] and then return to last-selected  
mode (e.g., TV).  
6.  
7.  
If desired, repeat steps 4 and 5 to delete other  
learned functions.  
Press EXIT to exit the programming mode.You will  
see an [EXIT SETUP] message as the URC-8910  
remote control returns to normal operation.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING VOLUME LOCK  
In its default (unlocked) state, the URC-8910 remote control allows  
each device to control its own volume only in its own mode (e.g., TV  
volume in the TV mode, VCR volume in VCR mode, etc.). However,  
using our Volum e Lo ck feature, you can lock the volume controls for  
each device to all modes (e.g., RCVR/AMP volume in all modes).  
Moreover, using the Volume Unlock feature (see the next page),  
you can further customize the settings so that a device’s volume  
controls are unlocked in one mode, but remain locked in all other  
modes (e.g., TV volume in the TV mode and RCVR/AMP volume in  
other modes).  
Programming Volume Lock  
1.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the cur-  
rent device and time to [CODE SET].  
NOTE: The device, its code, and time are examples. Your  
remote control settings may be different.  
NOTE: To exit programming at any time, press EXIT once or  
allow 30 seconds of inactivity to lapse. You will see [EXIT  
SETUP] as the remote control returns to normal operation.  
NOTE: [INVALID] means you have inadvertently pressed an  
incorrect key. Note your error and continue programming.  
2.  
(x 4) Press the M key four times until you see the display  
change to [VOL LOCK].  
NOTE: If you go past [VOL LOCK], press the L key one or  
more times to return to it.  
3.  
4.  
Press SELECT once to begin programming.You will  
see the display change to [TO MODE].  
Press a mode key (e.g., RCVR/AMP) to lock a device’s  
volume controls to all modes.You will see the display  
change to [SUCCESS] and then [EXIT SETUP] as the  
remote control automatically exits the programming  
mode and returns to normal operation.  
5.  
If desired, repeat steps 1 through 4 as needed to lock  
volume controls for other devices to all modes.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Volume Unlock  
1.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the  
current device and time to [CODE SET].  
2.  
(x 5) Press the M key five times until you see the display  
change to [VOL UNLOCK].  
NOTE: If you go past [VOL UNLOCK], press the L key one or  
more times to return to it.  
3.  
Press SELECT once to begin programming.You will  
see the display change to [ALL MODE].  
To unlock one mode, skip to step 4. Otherwise press  
SELECT once to unlock all modes.You will see the  
display change to [UNLOCKED] and then [EXIT SETUP]  
as the remote control automatically exits the pro-  
gramming mode and returns to normal operation.  
4.  
or  
(Optional) Press L (or M) once.You will see the  
display change to [ONE MODE].  
a. Press SELECT once.You will see the display change  
to [SEL MODE].  
b. Press a mode key once (e.g., TV) to unlock it.  
You will see the display change to [UNLOCKED]  
and return to [SEL MODE].  
c. If desired, repeat step 4b as needed to unlock  
volume controls for other devices. Otherwise,  
press EXIT to exit the programming mode.You  
will see an [EXIT SETUP] message as the remote  
control returns to normal operation.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING MACROS  
With programming, the M1 through M3 keys on your URC-8910  
remote control can be setup to perform repetitive, time-consuming  
operations for easy, convenient access through the press of a single  
key. Macro keys are ideal for home theater operations, setting a  
favorite channel, guide steps, or other multiple functions you would  
like to control with one key press. Moreover, each macro key can  
hold up to15 key presses total.  
NOTE: Programming a new macro over an existing one will erase the  
original macro.  
Programming A Favorite Channel  
With so many channels available through your cable or satellite  
system provider, you can program a macro that directly selects a  
favorite channel with one key press. For example, let’s assume your  
favorite cable programs are on channel 71. Perform the following  
steps to program a macro key for direct access of this channel:  
NOTE: This example assumes the TV tuner is connected directly to the cable  
line and not through a cable converter.  
1.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the cur-  
rent device and time to [CODE SET].  
NOTE: The device, its code, and time are examples. Your  
remote control settings may be different.  
NOTE: To exit programming at any time, press EXIT once or  
allow 30 seconds of inactivity to lapse. You will see [EXIT  
SETUP] as the remote control returns to normal operation.  
NOTE: [INVALID] means you have inadvertently pressed an  
incorrect key. Note your error and continue programming.  
2.  
(x 6) Press the M key six times until you see the display  
change to [KEY MACRO].  
NOTE: If you go past [KEY MACRO], press the L key one or  
more times to return to it.  
3.  
4.  
Press SELECT once to begin programming.You will  
see the display change to [SEL MACKEY].  
Select an open macro key (e.g., M1) and press it  
once.You will see the display change to [ENTER SEQ].  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.  
Enter a macro sequence of up to 15 keys. For our  
example, press the following keys once in this order:  
TV - 7- 1  
NOTE: If you have access to over 100 channels, add a 0  
before the channel numbers (e.g., 0-7-1). If the original  
remote control required pressing an Enter key to change the  
channel, also press the Enter key after the channel number  
(e.g., 0-7-1-ENTER).  
NOTE: An [ERROR] message, followed by [MAX = 15] alerts  
you that the macro sequence must be 15 keys or less.  
After pressing the first key (in the macro sequence),  
you will see the display change to [SEL TO END]. This  
message acts as a reminder to use SELECT to end the  
sequence (see next step).  
6.  
To end the macro sequence, press and hold SELECT  
until you see [SUCCESS] appear in the display,  
followed by [EXIT SETUP]. The URC-8910 remote  
control will automatically exit the programming  
mode and return to normal operation.  
Now when you press M1, you will instantly see cable channel 71 on  
your TV set.  
Programming A Master Power Key With Instant  
Channel Selection  
A macro key can be programmed to turn on and off your devices as  
well. For example, let’s set up a sequence that will turn on the TV  
and tune it to channel 3, and then turn on the cable converter and  
tune it to a premium channel (e.g., 11).  
NOTE: This example assumes all equipment is turned off and that the TV is  
connected through the cable converter with TV tuning set to channel 3.  
1.  
Perform steps 1 through 4 of the previous section,  
Programming A Favorite Channel on page 34.  
However, this time in step 4, substitute another open  
macro key (e.g., M2).  
2.  
Enter a macro sequence of up to 15 keys. For our  
example, press the following keys once in this order:  
CBL - POWER - TV - POWER- 0- 3 - CBL- 1- 1  
NOTE: If you have access to over 100 channels, add an 0  
before each set of channel numbers (e.g., 0-0-3 and 0-1-1).  
If the original remote control required pressing an Enter key  
to change the channel, also press the Enter key after each  
channel number (e.g., 0-0-3-ENTER and 0-1-1-ENTER).  
continued on next page...  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING MACROS  
Programming A Master Power Key With Instant  
Channel Selection (continued)  
NOTE: An [ERROR] message, followed by [MAX = 15] alerts  
you that the macro sequence must be 15 keys or less.  
3.  
4.  
After pressing the first key (in the macro sequence),  
you will see the display change to [SEL TO END].  
This message acts as a reminder to use SELECT to  
end the sequence (see next step).  
To end the macro sequence, press and hold SELECT  
until you see [SUCCESS] appear in the display,  
followed by [EXIT SETUP]. The remote control will  
automatically exit the programming mode and return  
to normal operation.  
Now when you press M2 once, the cable converter and TV will turn  
on, the TV will tune to channel 03, and then the cable converter will  
tune to channel 11.  
Clearing A Macro  
1.  
Perform steps 1 through 4 of the earlier section,  
Programming A Favorite Channel on page 34.  
However, this time in step 4, select a macro key you  
want to be cleared (e.g., M1 ~ M3).  
2.  
Press and hold SELECT to clear the macro key.  
You will see the display change to [SEL TO END]. This  
message acts as a reminder to use SELECT to end the  
sequence (see next step).  
3.  
Continue pressing SELECT until you see [SUCCESS]  
appear in the display, followed by [EXIT SETUP]. The  
URC-8910 remote control will automatically exit the  
programming mode and return to normal operation.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RE-ASSIGNING DEVICE KEYS  
The URC-8910 remote control can control a second TV,VCR, DVD  
player, or other device by using the Mode Map feature. For example,  
to control a TV, a cable converter, and two VCRs, you will need to re-  
assign the unused AUX key to operate the second VCR as follows:  
1.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the cur-  
rent device and time to [CODE SET].  
NOTE: The device, its code, and time are examples. Your  
remote control settings may be different.  
NOTE: To exit programming at any time, press EXIT once or  
allow 30 seconds of inactivity to lapse. You will see [EXIT  
SETUP] as the remote control returns to normal operation.  
NOTE: [INVALID] means you have inadvertently pressed an  
incorrect key. Note your error and continue programming.  
2.  
(x 7) Press the M key seven times until you see the display  
change to [MODE MAP].  
NOTE: If you go past [MODE MAP], press the L key one or  
more times to return to it.  
3.  
4.  
5.  
Press SELECT once to begin programming.You will  
see the display change to [FROM MODE].  
Select a mode to be copied (e.g., VCR) and press it  
once.You will see the display change to [TO MODE].  
Select a mode to be re-assigned (e.g., AUX) and  
press it once.You will see the display change to  
[SUCCESS], followed by [EXIT SETUP]. The URC-8910  
remote control will automatically exit the program-  
ming mode and return to normal operation.  
6.  
The AUX key is now ready to be programmed as  
your second VCR. See Programming Device Control  
on page 10.  
continued on next page...  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RE-ASSIGNING DEVICE KEYS (continued)  
To re-assign other device keys to the AUX key, repeat steps 1 through  
6 on the previous page but substitute the key sequence from the  
below chart:  
To Re-Assign Device Key  
AUX as 2nd TV key:  
Perform Sequence  
SET*- M(x 7) - SELECT - TV - AUX  
SET*- M(x 7) - SELECT - DVD- AUX  
SET*- M(x 7) - SELECT - SAT- AUX  
SET*- M(x 7) - SELECT - CD- AUX  
SET*- M(x 7) - SELECT - CBL - AUX  
SET*- M(x 7) - SELECT - RCVR/AMP - AUX  
AUX as 2nd DVD key:  
AUX as 2nd SAT key:  
AUX as 2nd CD key:  
AUX as 2nd CBL key:  
AUX as 2nd RCVR/AMP key:  
*NOTE: Press and hold SET (see step 1 on previous page).  
You can also re-assign another unused device key by substituting an  
open key for the AUX key in the above chart and performing the  
sequence. For example, to re-assign an unused SAT key as a second  
CD key, perform SET*- M (x 7) - SELECT - CD - SAT.  
USING KEYMOVER  
The URC-8910 remote control includes a Keymover feature that  
allows you to map (or copy) keys from one mode (i.e., source mode)  
to another mode (i.e., destination mode).  
NOTE: The following keys cannot be used as a source or destination: TV, VCR,  
DVD, AUX, SAT, CBL, RCVR/AMP, CD, HOME THEATER, and SET.  
Programming Keymover  
For example, if your VCR does not have volume control, try mapping  
the volume and mute keys from TV mode to VCR mode as follows:  
1.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the cur-  
rent device and time to [CODE SET].  
NOTE: The device, its code, and time are examples. Your  
remote control settings may be different.  
NOTE: To exit programming at any time, press EXIT once or  
allow 30 seconds of inactivity to lapse. You will see [EXIT  
SETUP] as the remote control returns to normal operation.  
NOTE: [INVALID] means you have inadvertently pressed an  
incorrect key. Note your error and continue programming.  
2.  
(x 8) Press the M key eight times until you see the display  
change to [KEYMOVER].  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: If you go past [KEYMOVER], press the L key one or  
more times to return to it.  
3.  
4.  
5.  
6.  
7.  
Press SELECT once to begin programming.You will  
see the display change to [FROM MODE].  
Select a source mode (e.g., TV) and press it once.You  
will see the display change to [FROM KEY].  
Select a source key (e.g., VOL+) and press it once.  
You will see the display change to [TO MODE].  
Select a destination mode (e.g., VCR) and press it  
once.You will see the display change to [TO KEY].  
Select a destination key (e.g., VOL+) and press it  
once.You will see the display change to [SUCCESS],  
followed by [EXIT SETUP]. The URC-8910 remote  
control will automatically exit the programming  
mode and return to normal operation.  
8.  
Repeat steps 1 through 7 twice more, substituting  
VOLand MUTE as source and destination keys in  
steps 5 and 7.  
Upon completion of the above procedure, you can now use your  
URC-8910 remote control to control the TV’s volume and mute in  
the VCR mode, as well as in the TV mode.  
Restoring Keymoved Keys to Default Settings  
Restoring A Single Keymoved Key  
1.  
Perform steps 1 through 7 of the previous section,  
Programming Keymover on the previous page.  
However, this time in step 6, make the destination  
mode the same as the source mode (e.g., TV).You  
will see the display change to [CLR KMVR].  
continued on next page...  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING KEYMOVER  
Restoring Keymoved Keys to Default Settings  
Restoring A Single Keymoved Key (continued)  
2.  
Press SELECT once to clear the keymoved key.You  
will see [DELETED] appear in the display, followed by  
[EXIT SETUP]. The URC-8910 remote control will  
automatically exit the programming mode and return  
to normal operation.  
Restoring All Keymoved Keys In A Single Mode  
1.  
Perform steps 1 through 4 of the earlier section,  
Programming Keymover on page 38. However, this  
time in steps 3 and 4, make the source mode and  
source key the same mode (e.g., TV).You will see the  
display change to [CLR KMVR].  
2.  
Press SELECT once to clear all keymoved keys from  
this mode.You will see [DELETED] appear in the  
display, followed by [EXIT SETUP]. The remote control  
will automatically exit the programming mode and  
return to normal operation.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING CHANNEL SCAN  
In the TV, VCR, DVD, SAT, and CBL modes, use the FAV key to start a  
3-second scan of all favorite channels (if programmed – see  
Programming Favorite Channel Scan below) and/or all channels for  
the selected mode.  
1.  
If Favorite Channel Scan has been set up, skip to  
step 2. Otherwise, on the URC-8910 remote control  
press TV, VCR, DVD, SAT, or CBL once.  
2.  
Press FAV once.  
• If Favorite Channel Scan has been set up, scanning  
of favorite channels will start and, upon comple-  
tion, continue to scan all channels upward for the  
same device.  
• If Favorite Channel Scan has not been set up,  
scanning will start with the current channel, then  
proceed to the next channel up, and continue  
until all channels of the selected device is  
scanned.You will see the LED (red light) and IR  
transmission icon ( ) blink each time a channel  
is scanned.  
3.  
To stop scanning channels at any time, press any key  
once (except the backlight key ).  
PROGRAMMING FAVORITE CHANNEL SCAN  
In the TV, VCR, DVD, SAT, or CBL mode, you can store a list of up to  
10 favorite channels, in any order, that will be immediately scanned  
when FAV is pressed (see Using Channel Scan above).  
NOTE: Only channels of one mode can be stored for Favorite Channel Scan.  
1.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the cur-  
rent device and time to [CODE SET].  
NOTE: The device, its code, and time are examples. Your  
remote control settings may be different.  
NOTE: To exit programming at any time, press EXIT once or  
allow 30 seconds of inactivity to lapse. You will see [EXIT  
SETUP] as the remote control returns to normal operation.  
NOTE: [INVALID] means you have inadvertently pressed an  
incorrect key. Note your error and continue programming.  
continued on next page...  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAMMING FAVORITE CHANNEL SCAN  
(continued)  
2.  
(x 4) Press the L key four times until you see the display  
change to [FAV CHAN].  
NOTE: If you go past [FAV CHAN], press the M key one or  
more times to return to it.  
3.  
4.  
5.  
Press SELECT once to begin programming.You will  
see the display change to the last-selected device  
(e.g., [VCR]).  
Select a mode (e.g., TV) for favorite channel  
scanning and press it once. Then press Press SELECT  
once.You will see the display change to [FAV].  
Use the keypad to enter a favorite channel number  
(e.g., 031). The display will show your entry.  
NOTE: If the original remote control required pressing an  
Enter key to change the channel, also press the ENTER key  
after the channel number (e.g., 0-3-1-ENTER). However, the  
display will not show the ENTER key.  
NOTE: If you made a mistake during entry, press any  
number key one or more times until you see the display  
clear out. Then try entering the correct numbers again.  
Press SELECT once.You will see the display clear out,  
ready for your next entry.  
6.  
7.  
If desired, repeat step 5 for each favorite channel to  
be stored, up to a total of 10 channels.  
NOTE: Once the tenth channel is entered, the remote control  
will automatically exit programming.  
(Optional) To exit programming, press and hold  
SELECT until you see [SUCCESS] appear in the  
display, followed by [EXIT SETUP]. The URC-8910  
remote control will automatically exit the program-  
ming mode and return to normal operation.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE HOME THEATER MODE  
The URC-8910 remote control includes a custom Home Theater  
mode. After the HOME THEATER key is programmed, it will allow you  
to access five groups of remote control keys without having to  
change device modes. However, there are some considerations.  
Keymoved and Learned functions, as well Macros programmed  
onto keys other than the dedicated macro keys (M1 ~ M3), are  
affected by the Home Theater mode. If keys are moved (using  
Keymover) or learned onto (using Learning) and they are placed  
on keys not within the Control Groups, the keys will be ignored  
when pressed.  
• A Macro on the POWER key (if applicable) will carry over to the  
Home Theater mode.  
Control Organization  
About Control Groups  
For Home Theater programming, the URC-8910 remote control’s  
keys are grouped by type of control into the following five  
control groups:  
(1) Playback Controls: PLAY, STOP, FWD, REW, F.FWD, F.REW, PAUSE,  
and REC  
(2) Audio Controls:  
VOL+, VOL-, and MUTE  
(3) Channel Controls: CH+, CH-, (Keypad) 0 ~ 9, ENTER, LAST,  
SLEEP, INFO, and TV/VID  
(4) Menu Controls:  
MENU, GUIDE, Cursor Controls (L, M,  
SELECT, and EXIT  
,
),  
(5) PIP Controls:  
PIP, MOVE, and SWAP  
About Device Groups  
Moreover, the URC-8910 remote control’s devices are grouped into  
the following five device groups:  
(1) Playback Group: VCR, DVD, CD, CBL, SAT, and RCVR/AMP  
(2) Audio Group:  
TV, VCR, CBL, SAT, DVD, CD, RCVR/AMP, and  
AUX  
(3) Channel Group: TV, VCR, CBL, SAT, DVD, CD, RCVR/AMP, and  
AUX  
(4) Menu Group:  
(5) PIP Group:  
TV, VCR, CBL, SAT, and DVD  
TV, VCR, CBL, and SAT  
continued on next page...  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE HOME THEATER MODE  
Control Organization  
About Device Groups (continued)  
The default Device Group settings from the factory is:  
(1) Playback Group: VCR  
(2) Audio Group:  
TV  
(3) Channel Group: CBL  
(4) Menu Group:  
(5) PIP Group:  
CBL  
TV  
Programming The Home Theater Mode  
For example, let’s assume you have a TV, a cable converter, and a VCR  
in your home theater system.You can set up the Home Theater mode  
so that selected controls are assigned to these devices as follows:  
1.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the cur-  
rent device and time to [CODE SET].  
NOTE: The device, its code, and time are examples. Your  
remote control settings may be different.  
NOTE: To exit programming at any time, press EXIT once or  
allow 30 seconds of inactivity to lapse. You will see [EXIT  
SETUP] as the remote control returns to normal operation.  
NOTE: [INVALID] means you have inadvertently pressed an  
incorrect key. Note your error and continue programming.  
2.  
3.  
(x 3) Press the L key three times until you see the display  
change to [THEATER].  
NOTE: If you go past [THEATER], press theM key one or  
more times to return to it.  
Press SELECT once to begin programming.You will  
see the display change to [PLAYBACK].  
NOTE: The program will automatically step through each  
Control Group (from Playback to PIP) as you perform steps  
3 through 7. However, you can use the L or M keys to navi-  
gate to a specific group to make further changes.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
a. Press SELECT once to enter Playback Control  
Group assignment.You will see the display change  
to the last-selected device (e.g., [TV]).  
b. Select a device for Playback Control Group assign-  
ment. For this example, press VCR once. This will  
assign the entire group of Playback Controls (i.e.,  
PLAY, STOP, FF, REW, F.FWD, F.REW, PAUSE, and  
REC) to the VCR.You will see the display change  
to your device choice (e.g., [VCR]).  
c. Press SELECT once to accept the assignment in  
step 3b.You will see the display change to the next  
Control Group assignment, [AUDIO]).  
4.  
Press SELECT once to enter Audio Control Group  
assignment.You will see the display change to the  
last-selected device (e.g., [VCR]).  
a. Select a device for Audio Control Group assign-  
ment. For this example, press TV once. This will  
assign the entire group of Audio Controls (i.e.,  
VOL+, VOL-, and MUTE) to the TV.You will see the  
display change to your device choice (e.g., [TV]).  
b. Press SELECT once to accept the assignment in  
step 4a.You will see the display change to the next  
Control Group assignment, [CHANNEL]).  
5.  
Press SELECT once to enter Channel Control Group  
assignment.You will see the display change to the  
last-selected device (e.g., [TV]).  
continued on next page...  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE HOME THEATER MODE  
Programming The Home Theater Mode  
5. (continued)  
a. Select a device for Channel Control Group assign-  
ment. For this example, press CBL once. This will  
assign the entire group of Channel Controls (i.e.,  
CH+, CH-, (Keypad) 0 ~ 9, ENTER, LAST,  
SLEEP, INFO, and TV/VID) to the cable converter.  
You will see the display change to your device  
choice (e.g., [CBL]).  
b. Press SELECT once to accept the assignment in  
step 5b.You will see the display change to the next  
Control Group assignment, [MENU]).  
6.  
Press SELECT once to enter Menu Control Group  
assignment.You will see the display change to the  
last-selected device (e.g., [CBL]).  
a. Select a device for Menu Control Group assignment.  
For this example, press CBL once. This will assign  
the entire group of Menu Controls (i.e., MENU,  
GUIDE, Cursor Controls (L,M,  
,
),SELECT,and  
EXIT) to the cable converter.You will see the display  
change to your device choice (e.g., [CBL]).  
b. Press SELECT once to accept the assignment in  
step 6a.You will see the display change to the next  
Control Group assignment, [PIP]).  
7.  
Press SELECT once to enter PIP Control Group  
assignment.You will see the display change to the  
last-selected device (e.g., [CBL]).  
a. Select a device for PIP Control Group assignment.  
For this example, press TV once. This will assign  
the entire group of PIP Controls (i.e., PIP, MOVE,  
and SWAP) to the TV.You will see the display  
change to your device choice (e.g., [TV]).  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
b. Press SELECT once to accept the assignment in  
step 7a.You will see the display change to the first  
Control Group assignment, [PLAYBACK]).  
8.  
or  
At this point, all Control Groups have been assigned.  
To change an assignment, use the L or M keys to  
navigate to a specific group and make changes by  
repeating the appropriate step (3, 4, 5, 6, or 7).  
Otherwise, to exit programming, press and hold  
SELECT until you see [SUCCESS] appear in the dis-  
play, followed by [EXIT SETUP]. The URC-8910  
remote control will automatically exit the program-  
ming mode and return to normal operation.  
Operating The Home Theater Mode  
After programming the Home Theater mode (see the previous  
section), you simply activate it by pressing HOME THEATER once.  
Instantly, groups of URC-8910 remote control keys will be assigned  
to their programmed devices.  
For the above example (in the previous section), pressing HOME  
THEATER once would assign the following keys to the VCR, TV, and  
cable converter:  
VCR:  
TV  
PLAY, STOP, FF, REW, F.FWD, F.REW, PAUSE, and REC  
:
VOL+, VOL-, MUTE, PIP, MOVE, and SWAP  
Cable Converter: CH+, CH-, (Keypad) 0 ~ 9, ENTER, LAST, SLEEP,  
INFO, TV/VID, MENU, GUIDE, Cursor Controls (L, M,  
,
), SELECT, and EXIT  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING COMMERCIAL SKIP  
The URC-8910 remote control includes a unique Commercial Skip  
feature, once programmed, that will allow you to skip viewing com-  
mercials by pressing the COM SKIP key. Then, as you change chan-  
nels (to view another program without commercials), an internal  
timer will count down a preset time interval before returning the  
device to the original channel.  
Programming Commercial Skip  
For example, let’s assume you are watching a national sports event  
on channel 2 that consistently breaks for one-minute commercials.  
Meanwhile, cable channel 26 is showing a favorite action movie  
without commercials. By performing the following steps, you can set  
Commercial Skip to automatically return the cable converter to the  
sports event after one minute of viewing the movie:  
NOTE: Commercial Skip only works in the following modes: TV, VCR, DVD,  
CBL, and SAT.  
1.  
Select the device where channels will be changed  
(e.g., CBL).  
2.  
On the URC-8910 remote control, press and hold  
COM SKIP until you see the display change from the  
current device and time to [CHANNEL].  
NOTE: The device, its code, and time are examples. Your  
remote control settings may be different.  
NOTE: To exit programming at any time, press EXIT once or  
allow 30 seconds of inactivity to lapse. You will see [EXIT  
SETUP] as the remote control returns to normal operation.  
NOTE: [INVALID] means you have inadvertently pressed an  
incorrect key. Note your error and continue programming.  
3.  
Use the keypad to enter a favorite channel number  
(e.g., 002). The display will show your entry.  
NOTE: If the original remote control required pressing an  
Enter key to change the channel, also press the ENTER key  
after the channel number (e.g., 0-0-2-ENTER). However, the  
display will not show the ENTER key.  
NOTE: If you made a mistake during entry, press EXIT once.  
You will see [EXIT SETUP] as the remote control returns to  
normal operation. Then try programming Commercial Skip  
again starting with step 1.  
4.  
Press SELECT once to accept your channel entry.You  
will see the display change to [30 SEC].  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.  
6.  
or  
If desired, press L (or M) one or times to select a  
different time interval.Your choices are 30 (default),  
60, 90, 120, 150, or 180 seconds. For this example,  
select 60 seconds.  
Press SELECT once to accept the 60-second setting.  
You will see [SUCCESS] appear in the display,  
followed by [EXIT SETUP]. The URC-8910 remote  
control will automatically exit the programming  
mode and return to normal operation.  
Operating Commercial Skip  
In our example, let’s assume you are watching a national sports  
event on cable channel 2 and it looks like a commercial is about to  
appear. Immediately, press COM SKIP once and then enter channel  
26 (e.g. 026).  
The cable converter will switch to channel 26 and, after 1 minute,  
automatically return to channel 2. The next time a commercial  
appears, try pressing COM SKIP once, followed by PREV once to  
activate the same sequence.  
For a more powerful Commercial Skip technique, try programming  
these steps into an open macro key (see Using Macros on page 34).  
This way you will be able to press one key to switch channels and  
return after a preset time.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RESTORING FACTORY DEFAULT SETTINGS  
The URC-8910 remote control includes an Operation Reset program  
that you can use to restore the unit to factory default settings.  
IMPORTANT: Executing this program will erase all custom settings,  
including Home Theater assignments, Macros, Learned Keys, Keymoved  
Keys, and all device assignments.  
1.  
On the URC-8910 remote control, press and hold  
SET until you see the display change from the cur-  
rent device and time to [CODE SET].  
NOTE: The device, its code, and time are examples. Your  
remote control settings may be different.  
NOTE: To exit programming at any time, press EXIT once or  
allow 30 seconds of inactivity to lapse. You will see [EXIT  
SETUP] as the remote control returns to normal operation.  
NOTE: [INVALID] means you have inadvertently pressed an  
incorrect key. Note your error and continue programming.  
2.  
(x 2) Press the L key twice until you see the display  
change to [OPS RESET].  
NOTE: If you go past [OPS RESET], press theM key one or  
more times to return to it.  
3.  
4.  
Press SELECT once to begin programming.You will  
see the display change to [CLR SETUP].  
Press SELECT once to start the process.You will see  
the display change to [RESET RAM] as the active  
memory is cleared, followed by [RESET E2] as the  
preprogrammed memory is restored.  
Then you will see [EXIT SETUP] as the URC-8910  
remote control automatically exits the programming  
mode and returns to normal operation.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ABOUT UPGRADING  
The URC-8910 remote control has the largest infrared code library  
available. However, if you purchase a brand new home entertain-  
ment or home automation device, it may not respond to the codes  
stored in the remote control’s memory.  
If this happens, please contact our Customer Support department  
(see Customer Support on page 74) to upgrade the URC-8910 remote  
control. The Customer Support representative will search our entire  
database for a code that matches your device and instruct you how  
to enter it into your URC-8910 remote control.  
If the code for your home entertainment or home automation device  
is not in our database, we will need to “capture” the code for that  
device from its original remote control.A new code would then be  
created and entered into your URC-8910 remote control. If necessary,  
the Customer Support representative can instruct you how to begin  
the capture procedure.  
NOTE: One For All reserves the right to replace a returned remote control with  
a new one of equal or superior functionality.  
Upgrade Exclusions  
• Home entertainment or home automation devices controlled by  
radio frequency (RF/UHF), wired, or ultrasonic remote controls.  
Only devices controlled by infrared remote controls are covered.  
• Home entertainment or home automation devices not controlled  
by remote controls.  
• Broken or defective product.  
• Products that operate over 100 kHz.  
• Infrared keyboards and infrared pointing devices (such as  
mouse substitutes).  
• All products for sale and/or use outside the continental United  
States, Hawaii, Alaska, or Canada.  
SPECIFICATIONS  
Remote Control Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 AAA Batteries  
Remote Control Dimensions  
(H x W x D). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2⁄16 x 2-10⁄16 x 2-3⁄16 in.  
(H x W x D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 x 65 x 31 mm  
Remote Control Weight (without Batteries) . . . . . . . . . . . . . . . . . . . . . . . . 8 oz (220 g)  
NOTE: Specifications are typical. Individual units might vary. Specifications  
are subject to change and improvement without notice.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
PROBLEM:  
SOLUTION:  
PROBLEM:  
SOLUTION:  
LCD (Liquid Crystal Display) begins to fade, does not  
appear, or the LOW BATTERY ( )icon appears.  
Replace the batteries with four (4) new AAA alkaline  
batteries (see page 4).  
LED (red light) and IR ( ) icon blinks when you press a  
key, but home entertainment device does not respond.  
Be sure to select the correct device key for the device you  
want to control.Also, aim the URC-8910 remote control  
at the device not farther than 15 feet away.  
PROBLEM:  
SOLUTION:  
The URC-8910 remote control does not control home  
entertainment devices or commands do not work properly.  
Try all listed codes for the device brands being set up.  
Make sure they originally can be operated with an  
infrared remote control.  
PROBLEM:  
SOLUTION:  
TV/VCR combo does not respond properly.  
Use the VCR codes for your brand. Some combo units may  
require both a TV code and a VCR code for full operation.  
PROBLEM:  
SOLUTION:  
The URC-8910 remote control does not turn on Sony or  
Sharp TV/VCR Combo.  
For Power On, these products require programming TV  
codes. For Sony, use TV code 0000 and VCR code 0032.  
For Sharp, use TV code 0093 and VCR code 0048.  
PROBLEM:  
SOLUTION:  
Changing channels does not work properly.  
If original remote control required pressing ENTER to  
change channels, press ENTER on the URC-8910 remote  
control after entering the channel number.  
PROBLEM:  
SOLUTION:  
During learning, the display shows an [ERROR] message  
after pressing and holding a key to be learned.  
A bad capture has occurred.Avoid high-ambient light  
sources, such as direct daylight and fluorescent bulbs.  
Also, try readjusting positions of remote controls before  
performing the procedure again. Make sure the key(s)  
on the original remote control is (are) operating correctly.  
PROBLEM:  
SOLUTION:  
CH+ and CH- do not work for your RCA TV.  
Due to RCA design (1983-1987), only the original remote  
control will operate these functions.  
PROBLEM:  
SOLUTION:  
No remote control of volume.  
See Using Volume Lock on page 32 to lock/unlock the  
volume controls.  
PROBLEM:  
SOLUTION:  
The URC-8910 remote control turns on audio devices and  
controls volume, but does not change preset channels.  
Some products may need both a Tuner/Receiver code  
and an Audio Amplifier code for remote control of all  
features on your audio device.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROBLEM:  
SOLUTION:  
PROBLEM:  
SOLUTION:  
Tried Search For Your Code method and still could not find  
a working code.  
Your device may be newer than the URC-8910 remote  
control. See About Upgrading on page 51.  
Your satellite (DSS) receiver does not respond to the codes  
listed on page 18.  
Make sure the satellite (DSS) receiver can be operated  
with an Infrared (IR) remote control and is not set up to  
receive only Radio Frequency (RF) signals.  
ERROR MESSAGES  
A wrong key sequence or incorrect data has  
been entered. Try entry again.  
Requested manufacturer’s code has not been  
found in the remote control’s database. Try  
another code.  
Macro sequence being entered has reached the  
maximum limit of 15 keystrokes. Try entry  
again with fewer keystrokes.  
A complete cycle of code search in the  
URC-8910 remote control’s database has been  
reached. Try another code search or contact  
Customer Support (see page 74)  
An error has occurred during a learning or  
programming sequence. Try entry again.  
Indicates a check result of E2 status is either  
bad or is not present. Contact Customer  
Support (see page 74).  
Indicates data captured during learning has  
filled the URC-8910 remote control’s memory.  
Try deleting older learned keys to free up  
memory space (see page 31).  
Indicates data captured during learning has  
caused a error in the URC-8910 remote con-  
trol’s memory. Try learning again.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KEY INDEX  
Audio Amplifier Functions  
Press RCVR/AMP once to control your audio  
amplifier.  
Press POWER once to turn on or off the  
selected device (e.g, RCVR/AMP).  
Use GUIDE to display your audio amplifier’s  
program guide or setup menu.  
Use INFO to display the audio amplifier’s  
program information.  
Use SELECT to set the surround sound. Use L  
(or M) to adjust the volume higher (or lower).  
Use (or ) to adjust the balance left (or  
right).  
Use VOL+ (or VOL-) to raise (or lower) the  
audio amplifier’s audio volume.  
Press MUTE once to turn the audio amplifier’s  
audio off or on.  
Use CH+ (or CH-) to select the audio amplifier’s  
next higher (or lower) station (if applicable).  
Use PREV to change the radio band  
(if applicable).  
Use the keypad (1 ~ 9 and 0) to  
select audio sources (e.g., 1~ 10). If  
the original remote control required  
pressing an Enter key to change the  
audio source, also press the ENTER  
key after the source number (e.g.,  
9-ENTER).  
Press ENTER once after entering the source  
numbers on some audio amplifiers.  
Use TV/VID to switch the audio amplifier  
between input and output.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use the transport keys to control  
your CD player (if applicable).  
Use SLEEP to activate your audio amplifer’s  
sleep timer (not available for all devices).  
After programming, press M1 ~ M3 once to  
run a desired macro (see Using Macros on  
page 34).  
After programming, press L1 ~ L4  
once to activate a learned function.  
See Using Learning on page 29.  
Use to turn on or off the key backlight.  
When this feature is activated, keys will  
remain backlit for 5 seconds after the last key  
press. In the setup mode, backlighting  
will remain on for 30 seconds.  
Use SET for all programming sequences.  
Audio Cassette Deck Functions  
Press AUX once to control your audio cassette  
deck. See Re-assigning Device Keys on page 37.  
Press POWER once to turn on or off the  
selected device (e.g, AUX).  
Use GUIDE to display your audio cassette  
deck’s program guide (if applicable).  
Use INFO to display the audio cassette deck’s  
program information.  
Use the cursor keys (L, M, , or ) to move  
the cursor in the audio cassette deck’s pro-  
gram guide and menu screens. Use SELECT to  
choose options from the menu or guide.  
Use VOL+ (or VOL-) to raise (or lower) the  
audio cassette deck’s audio volume  
(if applicable).  
continued on next page...  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KEY INDEX  
Audio Cassette Deck Functions (continued)  
Press MUTE once to turn the audio cassette  
deck’s audio off or on (if applicable).  
Use the keypad (1 ~ 9 and 0) to  
directly select tracks. If the original  
remote control required pressing an  
Enter key to select a track, also press  
the ENTER key after the track number  
(e.g., 1-2-ENTER).  
Use TV/VID to switch the audio cassette deck  
between input and output.  
Use the transport keys to control  
your audio cassette deck.  
After programming, press M1 ~ M3 once to  
run a desired macro (see Using Macros on  
page 34).  
After programming, press L1 ~ L4  
once to activate a learned function.  
See Using Learning on page 29.  
Use to turn on or off the key backlight.  
When this feature is activated, keys will  
remain backlit for 5 seconds after the last key  
press. In the setup mode, backlighting  
will remain on for 30 seconds.  
Use SET for all programming sequences.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Receiver Functions  
Press RCVR/AMP once to control your audio  
receiver.  
Press POWER once to turn on or off the  
selected device (e.g, RCVR/AMP).  
Use GUIDE to display your audio receiver’s  
program guide or setup menu.  
Use INFO to display the audio receiver’s  
program information.  
Use SELECT to set the surround sound. Use L  
(or M) to adjust the volume higher (or lower).  
Use (or ) to adjust the balance left (or  
right).  
Use VOL+ (or VOL-) to raise (or lower) the  
audio receiver’s audio volume.  
Press MUTE once to turn the audio receiver’s  
audio off or on.  
Use CH+ (or CH-) to select the audio receiver’s  
next higher (or lower) station (if applicable).  
Use PREV to change the radio band  
(if applicable).  
Use the keypad (1 ~ 9 and 0) to  
select audio sources (e.g., 1~ 10). If  
the original remote control required  
pressing an Enter key to change the  
audio source, also press the ENTER  
key after the source number (e.g.,  
9 -ENTER).  
Press ENTER once after entering the source  
numbers on some audio receivers.  
Use TV/VID to switch the audio receiver  
between input and output.  
continued on next page...  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KEY INDEX  
Audio Receiver Functions (continued)  
Use the transport keys to control  
your CD player (if applicable).  
Use SLEEP to activate your audio receiver’s  
sleep timer (not available for all devices).  
After programming, press M1 ~ M3 once to  
run a desired macro (see Using Macros on  
page 34).  
After programming, press L1 ~ L4  
once to activate a learned function.  
See Using Learning on page 29.  
Use to turn on or off the key backlight.  
When this feature is activated, keys will  
remain backlit for 5 seconds after the last key  
press. In the setup mode, backlighting  
will remain on for 30 seconds.  
Use SET for all programming sequences.  
Audio Turntable Functions  
Press AUX once to control your audio turn-  
table. See Re-assigning Device Keys on page 32.  
Press POWER once to turn on or off the  
selected device (e.g, AUX).  
Use GUIDE to display your audio turntable’s  
program guide (if applicable).  
Use INFO to display the audio turntable’s  
program information.  
Use SELECT to select a disc. Use L (or M) to  
select the next (or previous) LP. Use (or  
to select the next (or previous) track.  
)
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use VOL+ (or VOL-) to raise (or lower) the  
audio turntable’s audio volume (if applicable).  
Press MUTE once to turn the audio turntable’s  
audio off or on (if applicable).  
Use the keypad (1 ~ 9 and 0) to  
directly select tracks. If the original  
remote control required pressing an  
Enter key to select a track, also press  
the ENTER key after the track number  
(e.g., 1-2-ENTER).  
Use the transport keys to control  
your audio turntable (if applicable).  
After programming, press M1 ~ M3 once to  
run a desired macro (see Using Macros on  
page 34).  
After programming, press L1 ~ L4  
once to activate a learned function.  
See Using Learning on page 29.  
Use to turn on or off the key backlight.  
When this feature is activated, keys will  
remain backlit for 5 seconds after the last key  
press. In the setup mode, backlighting  
will remain on for 30 seconds.  
Use SET for all programming sequences.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KEY INDEX (Continued)  
Cable Converter Functions  
Press CBL once to control your cable  
converter.  
Press POWER once to turn on or off the  
selected device (e.g, SAT).  
Press MENU once to display your cable  
converter’s main menu.  
Use GUIDE to display your cable converter’s  
program guide or setup menu.  
Use EXIT to exit from your cable converter’s  
guide or menu.  
Use INFO to display the cable converter’s  
current channel and program information.  
Use the cursor keys (L, M, , or ) to move  
the cursor in the cable converter’s program  
guide and menu screens. Use SELECT to  
choose options from the menu or guide.  
Use VOL+ (or VOL-) to raise (or lower) the  
cable converter’s audio volume (if applicable).  
Press MUTE once to turn the cable converter’s  
audio off or on (if applicable).  
Use FAV to scan favorite channels and/or all  
channels. See Using Channel Scan and Program-  
ming Favorite Channel Scan on page 41.  
Use CH+ (or CH-) to select the cable convert-  
er’s next higher (or lower) channel.  
Press PREV once to recall the last-viewed  
channel and to page back one screen on the  
cable converter’s main menu.  
Use the keypad (1 ~ 9 and 0) to  
directly select channels (e.g., 009 or  
031). If the original remote control  
required pressing an Enter key to  
change the channel, also press the  
ENTER key after the channel number  
(e.g., 0-3-1-ENTER).  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press ENTER once after entering the channel  
numbers on some TVs.  
Use TV/VID to switch the TV’s input to view  
TV or cable programs.  
Use the transport keys to control  
your cable converter’s VOD service  
(if applicable).  
Use SLEEP to activate your cable converter’s  
sleep timer (not available for all devices).  
After programming, press M1 ~ M3 once to  
run a desired macro (see Using Macros on  
page 34).  
After programming, press L1 ~ L4  
once to activate a learned function.  
See Using Learning on page 29.  
Use PIP to switch the Picture-In-Picture  
feature on or off (if available on your TV).  
Use MOVE to move the window picture  
to different positions in the main picture.  
Use SWAP to switch images and sound  
between the main and window pictures.  
After programming, use COM SKIP to skip  
commercials on your cable converter. See  
Using Commercial Skip on page 48.  
Use to turn on or off the key backlight.  
When this feature is activated, keys will  
remain backlit for 5 seconds after the last key  
press. In the setup mode, backlighting  
will remain on for 30 seconds.  
Use SET for all programming sequences.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KEY INDEX (continued)  
CD Player Functions  
Press CD once to control your CD player.  
Press POWER once to turn on or off the  
selected device (e.g, CD).  
Use GUIDE to display your CD player’s  
program guide.  
Use INFO to display the CD player’s current  
channel and program information.  
Use SELECT to select a compact disc. Use L  
(or M) to select the next (or previous) CD.  
Use (or ) to select the next (or previous)  
track.  
Use VOL+ (or VOL-) to raise (or lower) the  
CD player’s audio volume (if applicable).  
Press MUTE once to turn the CD player’s  
audio off or on (if applicable).  
Use the keypad (1 ~ 9 and 0) to  
directly select tracks. If the original  
remote control required pressing an  
Enter key to select a track, also press  
the ENTER key after the track number  
(e.g., 1-2-ENTER).  
Use the transport keys to control  
your CD player.  
After programming, press M1 ~ M3 once to  
run a desired macro (see Using Macros on  
page 34).  
After programming, press L1 ~ L4  
once to activate a learned function.  
See Using Learning on page 29.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use to turn on or off the key backlight.  
When this feature is activated, keys will  
remain backlit for 5 seconds after the last key  
press. In the setup mode, backlighting  
will remain on for 30 seconds.  
Use SET for all programming sequences.  
DVD Player Functions  
Press DVD once to control your DVD player.  
Press POWER once to turn on or off the  
selected device (e.g, DVD).  
Press MENU once to display your DVD player’s  
main menu.  
Use GUIDE to display your DVD player’s  
program guide.  
Use EXIT to exit from your DVD player’s guide  
or menu.  
Use INFO to display the DVD player’s current  
channel and program information.  
Use the cursor keys (L, M, , or ) to move  
the cursor in the DVD player’s program guide  
and menu screens. Use SELECT to choose  
options from the menu or guide.  
Use VOL+ (or VOL-) to raise (or lower) the  
DVD player’s audio volume (if applicable).  
Press MUTE once to turn the DVD player’s  
audio off or on (if applicable).  
Use FAV to scan favorite channels and/or all  
channels. See Using Channel Scan and Program-  
ming Favorite Channel Scan on page 41.  
Use the keypad (1 ~ 9 and 0) to  
directly select chapters (e.g., 09 or  
31). If the original remote control  
required pressing an Enter key to  
select a chapter, also press the ENTER  
key after the chapter number  
(e.g., 3-1-ENTER).  
continued on next page...  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KEY INDEX  
DVD Player Functions (continued)  
Use TV/VID to switch the TV’s input to view  
TV or DVD programs.  
Use the transport keys to control  
your DVD player.  
After programming, press M1 ~ M3 once to  
run a desired macro (see Using Macros on  
page 34).  
After programming, press L1 ~ L4  
once to activate a learned function.  
See Using Learning on page 29.  
Use to turn on or off the key backlight.  
When this feature is activated, keys will  
remain backlit for 5 seconds after the last key  
press. In the setup mode, backlighting  
will remain on for 30 seconds.  
Use SET for all programming sequences.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Home Automation Functions  
Press AUX once to control home automation.  
See Re-assigning Device Keys on page 37.  
Press POWER once to turn on home  
automation.  
Use VOL+ (or VOL-) to brighten (or dim) the  
lights controlled by home automation.  
Press MUTE once to turn off home  
automation.  
Use CH+ (or CH-) to turn home automation  
on (or off).  
After programming, press M1 ~ M3 once to  
run a desired macro (see Using Macros on  
page 34).  
After programming, press L1 ~ L4  
once to activate a learned function.  
See Using Learning on page 29.  
Use to turn on or off the key backlight.  
When this feature is activated, keys will  
remain backlit for 5 seconds after the last key  
press. In the setup mode, backlighting  
will remain on for 30 seconds.  
Use SET for all programming sequences.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KEY INDEX  
LD (Laser Disc) Player Functions  
Press AUX once to control home automation.  
See Re-assigning Device Keys on page 37.  
Press POWER once to turn on or off the  
selected device (e.g, AUX).  
Press MENU once to display your LD player’s  
main menu.  
Use GUIDE to display your LD player’s  
program guide.  
Use EXIT to exit from your LD player’s guide  
or menu.  
Use INFO to display the LD player’s current  
channel and program information.  
Use the cursor keys (L, M, , or ) to move  
the cursor in the LD player’s program guide  
and menu screens. Use SELECT to choose  
options from the menu or guide.  
Use VOL+ (or VOL-) to raise (or lower) the  
LD player’s audio volume (if applicable).  
Press MUTE once to turn the LD player’s  
audio off or on (if applicable).  
Use the keypad (1 ~ 9 and 0) to  
directly select chapters (e.g., 09 or  
31). If the original remote control  
required pressing an Enter key to  
select a chapter, also press the ENTER  
key after the chapter number  
(e.g., 3-1-ENTER).  
Use TV/VID to switch the TV’s input to view  
TV or LD programs.  
Use the transport keys to control  
your LD player.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After programming, press M1 ~ M3 once to  
run a desired macro (see Using Macros on  
page 34).  
After programming, press L1 ~ L4  
once to activate a learned function.  
See Using Learning on page 29.  
Use to turn on or off the key backlight.  
When this feature is activated, keys will  
remain backlit for 5 seconds after the last key  
press. In the setup mode, backlighting  
will remain on for 30 seconds.  
Use SET for all programming sequences.  
Satellite Receiver Functions  
Press SAT once to control your satellite  
receiver.  
Press POWER once to turn on or off the  
selected device (e.g, SAT).  
Press MENU once to display your satellite  
receiver’s main menu.  
Use GUIDE to display your satellite receiver’s  
program guide or setup menu.  
Use EXIT to exit from your satellite receiver’s  
guide or menu.  
Use INFO to display the satellite receiver’s  
current channel and program information.  
Use the cursor keys (L, M, , or ) to move  
the cursor in the satellite receiver’s program  
guide and menu screens. Use SELECT to  
choose options from the menu or guide.  
Use VOL+ (or VOL-) to raise (or lower) the  
satellite receiver’s audio volume (if applicable).  
Press MUTE once to turn the satellite receiver’s  
audio off or on (if applicable).  
Use FAV to scan favorite channels and/or all  
channels. See Using Channel Scan and Program-  
ming Favorite Channel Scan on page 41.  
continued on next page...  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KEY INDEX  
Satellite Receiver Functions (continued)  
Use CH+ (or CH-) to select the satellite  
receiver’s next higher (or lower) channel.  
Press PREV once to recall the last-viewed  
channel and to page back one screen on the  
satellite receiver’s main menu.  
Use the keypad (1 ~ 9 and 0) to  
directly select channels (e.g., 009 or  
031). If the original remote control  
required pressing an Enter key to  
change the channel, also press the  
ENTER key after the channel number  
(e.g., 0-3-1-ENTER).  
Press ENTER once after entering the channel  
numbers on some TVs.  
Use TV/VID to switch the TV’s input to view  
TV or satellite programs.  
Use the transport keys to control  
your satellite receiver’s PVR or VOD  
service (if applicable).  
Use SLEEP to activate your satellite receiver’s  
sleep timer (not available for all devices).  
After programming, press M1 ~ M3 once to  
run a desired macro (see Using Macros on  
page 34).  
After programming, press L1 ~ L4  
once to activate a learned function.  
See Using Learning on page 29.  
Use PIP to switch the Picture-In-Picture  
feature on or off (if available on your TV).  
Use MOVE to move the window picture  
to different positions in the main picture.  
Use SWAP to switch images and sound  
between the main and window pictures.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After programming, use COM SKIP to skip  
commercials on your satellite receiver. See  
Using Commercial Skip on page 48.  
Use to turn on or off the key backlight.  
When this feature is activated, keys will  
remain backlit for 5 seconds after the last key  
press. In the setup mode, backlighting  
will remain on for 30 seconds.  
Use SET for all programming sequences.  
TV Functions  
Press TV once to control your television.  
Press POWER once to turn on or off the  
selected device (e.g, TV).  
Press MENU once to display your TV’s  
main menu.  
Use GUIDE to display your TV’s program  
guide or setup menu.  
Use EXIT to exit from your TV’s guide  
or menu.  
Use INFO to display the TV’s current channel  
and program information.  
Use the cursor keys (L, M, , or ) to move  
the cursor in the TV’s program guide and  
menu screens. Use SELECT to choose options  
from the menu or guide.  
Use VOL+ (or VOL-) to raise (or lower) the  
TV’s audio volume.  
Press MUTE once to turn the TV audio off  
or on.  
Use FAV to scan favorite channels and/or all  
channels. See Using Channel Scan and Program-  
ming Favorite Channel Scan on page 41.  
continued on next page...  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KEY INDEX  
TV Functions (continued)  
Use CH+ (or CH-) to select the TV’s next  
higher (or lower) channel.  
Press PREV once to recall the last-viewed  
channel and to page back one screen on the  
TV’s main menu.  
Use the keypad (1 ~ 9 and 0) to  
directly select channels (e.g., 009 or  
031). If the original remote control  
required pressing an Enter key to  
change the channel, also press the  
ENTER key after the channel number  
(e.g., 0-3-1-ENTER).  
Press ENTER once after entering the channel  
numbers on some TVs.  
Use TV/VID to switch the TV’s input to view  
TV or video programs.  
Use the transport keys to control  
your VCR.  
To record a VCR program, press REC  
twice.  
Use SLEEP to activate your TV’s sleep  
timer (not available for all devices).  
After programming, press M1 ~ M3 once to  
run a desired macro (see Using Macros on  
page 34).  
After programming, press L1 ~ L4  
once to activate a learned function.  
See Using Learning on page 29.  
Use PIP to switch the Picture-In-Picture  
feature on or off (if available on your TV).  
Use MOVE to move the window picture  
to different positions in the main picture.  
Use SWAP to switch images and sound  
between the main and window pictures.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After programming, use COM SKIP to skip  
commercials on your TV. See Using  
Commercial Skip on page 48.  
Use to turn on or off the key backlight.  
When this feature is activated, keys will  
remain backlit for 5 seconds after the last key  
press. In the setup mode, backlighting  
will remain on for 30 seconds.  
Use SET for all programming sequences.  
VCR Functions  
Press VCR once to control your VCR.  
Press POWER once to turn on or off the  
selected device (e.g, VCR).  
Press MENU once to display your VCR’s  
main menu.  
Use GUIDE to display your VCR/PVR’s  
program guide or setup menu (if applicable).  
Use EXIT to exit from your VCR’s guide  
or menu.  
Use the cursor keys (L, M, , or ) to move  
the cursor in the VCR’s program guide and  
menu screens. Use SELECT to choose options  
from the menu or guide.  
Use VOL+ (or VOL-) to raise (or lower) the  
VCR’s audio volume (if applicable).  
Press MUTE once to turn the VCR audio off  
or on (if applicable).  
Use FAV to scan favorite channels and/or all  
channels. See Using Channel Scan and Program-  
ming Favorite Channel Scan on page 41.  
Use CH+ (or CH-) to select the TV’s next  
higher (or lower) channel.  
continued on next page...  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KEY INDEX  
VCR Functions (continued)  
Press PREV once to recall the last-viewed  
channel and to page back one screen on the  
VCR’s main menu.  
Use the keypad (1 ~ 9 and 0) to  
directly select channels (e.g., 009 or  
031). If the original remote control  
required pressing an Enter key to  
change the channel, also press the  
ENTER key after the channel number  
(e.g., 0-3-1-ENTER).  
Press ENTER once after entering the channel  
numbers on some VCRs.  
Use TV/VID to switch the TV’s input to view  
TV or VCR programs.  
Use the transport keys to control  
your VCR.  
To record a VCR program, press REC  
twice.  
Use SLEEP to activate your VCR’s sleep  
timer (not available for all devices).  
After programming, press M1 ~ M3 once to  
run a desired macro (see Using Macros on  
page 34).  
After programming, press L1 ~ L4  
once to activate a learned function.  
See Using Learning on page 29.  
Use PIP to switch the Picture-In-Picture  
feature on or off (if available on your TV).  
Use MOVE to move the window picture  
to different positions in the main picture.  
Use SWAP to switch images and sound  
between the main and window pictures.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use to turn on or off the key backlight.  
When this feature is activated, keys will  
remain backlit for 5 seconds after the last key  
press.In the setup mode,backlighting  
will remain on for 30 seconds.  
Use SET for all programming sequences.  
LIMITED WARRANTY  
One For All® warrants, to the original purchaser only, that this  
product will be free from defects in materials and workmanship,  
under normal use, for ninety (90) days from the date of original  
purchase.  
This limited warranty is valid only on ONE FOR ALL® product  
purchased and used in the United States of America or Canada,and  
does not apply to products used for industrial or commercial pur-  
pose.  
The limited warranty does not cover damage or failure caused by  
products or services not supplied by ONE FOR ALL® , or which  
result from accident, misuse, abuse, neglect, mishandling, misap-  
plication, faulty installation, set-up adjustment, improper mainte-  
nance, alteration, maladjustment of consumer controls, modifica-  
tions, commercial use, or that is attributable to acts of God.  
There are no express warranties except as listed above. ONE FOR  
ALL® SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE-  
QUENTIAL DAMAGES RESULTING FROM THE USE OF THIS  
PRODUCT OR ARISING OUT OF ANY BREACH OF WARRANTY.  
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY  
PERIOD SET FORTH ABOVE. Some states do not allow the exclu-  
sion or limitation of incidental or consequential damages, or limi-  
tations on how long an implied warranty lasts, so the above exclu-  
sions or limitations may not apply to you. This warranty gives you  
specific legal rights and you may also have other rights which vary  
from state to state.  
To obtain warranty service for a defective product during the war-  
ranty period, please return the product, preferably in the original  
carton, along with your purchase receipt, to the store of original  
purchase. A note detailing the complaint would be helpful. The  
store, at its option, will replace or repair this product if found to be  
defective.  
One For All: 330-405-8655 (for Warranty only)  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMER SUPPORT  
For assistance, please contact us in any of the following ways:  
• Consumer Help Line: (330) 405-8616  
ADDITIONAL INFORMATION  
As you update your home entertainment system, One For All® has  
a universal remote control that will fit your needs. Look for these  
exciting products at a retailer near you.  
One For All Access 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-3605  
One For All Video Expert 4 Device . . . . . . . . . . . . . . . . . . . . URC-4081  
One For All Video Expert Plus 4L  
Upgradeable Remote Control with Learning. . . . . . . . . . . . URC-4880  
One For All Access 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-4605  
One For All Access 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-5705  
One For All 6 Home Theater . . . . . . . . . . . . . . . . . . . . . . . . . URC-6011  
One For All 8 Home Theater . . . . . . . . . . . . . . . . . . . . . . . . . URC-8011  
One For All 8L Home Theater with Learning . . . . . . . . . . . URC-8811  
One For All A/V Producer 8 Device Learner . . . . . . . . . . . . URC-8911  
One For All IR/RF Home Producer 8 Device Learner. . . . . URC-9911  
ONE FOR ALL® is the registered trademark of Universal Electronics  
Inc. Computime International Ltd. is the Licensee of the ONE FOR  
ALL® brand for USA and Canada.  
Copyright 2002 by Universal Electronics Inc. No part of this publi-  
cation may be reproduced, transmitted, transcribed, stored in any  
retrieval system, or translated to any language, in any form or by any  
means, electronic, mechanical, magnetic, optical, manual, or otherwise,  
without the prior written permission of Universal Electronics Inc.  
The One For All A/V LCD 8-Device With Learning Universal Remote  
Control (URC-8910) is compatible for use in North America,  
excluding Mexico.  
URC-8910B00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04/02  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUFACTURER’S CODES  
Setup Codes for Audio Amplifiers:  
GE  
0078  
0892  
0331  
0165  
0321,0892  
0321  
0395  
0892  
0892  
0395  
0321  
0689  
0078  
0331  
0078  
0354  
Harman/Kardon  
JVC  
Luxman  
Marantz  
Nakamichi  
Optimus  
Philips  
Polk Audio  
Realistic  
Sansui  
Sony  
Soundesign  
Victor  
Wards  
Yamaha  
Setup Codes For Audio Cassette Decks:  
Sony  
0243  
Setup Codes for Audio Receivers:  
ADC  
0531  
Aiwa  
0121,1089,1405  
Bose  
1229  
Capetronic  
Carver  
0531  
1089,1189  
Compaq  
Denon  
1136  
1104,1160  
Harman/Kardon  
Hewlett Packard  
JBL  
0110  
1181  
0110  
JVC  
0074  
Kenwood  
MCS  
0186,1027,1313,1569,1570  
0039  
Magnavox  
Marantz  
Onkyo  
0531,1089,1189  
0039,1089,1189  
0135  
Optimus  
Panasonic  
Philips  
Pioneer  
Proscan  
Quasar  
0531,0670,0186,1023  
0039,1518  
1089,1189,1269  
0531,0014,0150,0630,1023  
1254  
0039  
RCA  
0531,1023,1254  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sansui  
1089  
Sharp  
0186  
Sony  
1058,1158,1258  
Soundesign  
Sunfire  
Technics  
Thorens  
Victor  
0670  
1313  
0039,1308,1309,1518  
1189  
0074  
Wards  
0014  
Yamaha  
0176,0186,1176  
Setup Codes For Audio Turntables:  
Aiwa  
Carver  
Magnavox  
Marantz  
Philips  
0188  
0188  
0188  
0188  
0188  
Setup Codes for Cable Converters:  
ABC  
0003,0017  
0899  
0899  
0476,0810  
0144  
0009,0273  
0003,0476,0276,0810  
0000  
Americast  
Bell South  
General Instrument  
GoldStar  
Hamlin  
Jerrold  
Memorex  
Motorola  
Pace  
0476,1106  
0237  
Panasonic  
Paragon  
Philips  
Pioneer  
Pulsar  
0000,0107  
0000  
0305,0317  
0144,0533,0877  
0000  
Quasar  
0000  
Regal  
Runco  
0273,0279  
0000  
Samsung  
Scientific Atlanta  
Sony  
0144  
0477,0017,0877  
1006  
Starcom  
Supercable  
Toshiba  
0003  
0276  
0000  
Zenith  
0000,0525,0899  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUFACTURER’S CODES (continued)  
Setup Codes For CD Players:  
Aiwa  
Burmester  
0157,0124  
0420  
California Audio Labs 0029,0303  
Carver  
0157,0179,0437  
DKK  
0000  
Denon  
Emerson  
Fisher  
0003,0873  
0305  
0179,0174  
Garrard  
Genexxa  
Harman/Kardon  
Hitachi  
JVC  
0420,0393  
0032,0305  
0157,0173  
0032  
0072  
Kenwood  
Krell  
0028,0037,0190,0626,0681,0826  
0157  
LXI  
0305  
Linn  
0157  
MCS  
0029  
MTC  
0420  
Magnavox  
Marantz  
Mission  
NSM  
0157,0305  
0029,0157,0180,0626  
0157  
0157  
Nikko  
0174  
Onkyo  
Optimus  
Panasonic  
Parasound  
Philips  
Pioneer  
Polk Audio  
Proton  
QED  
0101,0868  
0000,0032,0179,0305,0037,0420,0145,0468,0437,1063  
0029,0303  
0420  
0157,0626  
0032,0305,0468,1062,1063  
0157  
0157  
0157  
Quasar  
RCA  
0029  
0032,0179,0305,0053,0468,0764,1062  
Realistic  
Rotel  
SAE  
0179,0420,0180  
0157,0420  
0157  
Sansui  
Sanyo  
0157,0305  
0179  
Scott  
0305  
Sears  
0305  
Sharp  
0037,0180,0861  
0180,1067  
0157  
Sherwood  
Sonic Frontiers  
Sony  
0000,0185,0490  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Soundesign  
Tascam  
Teac  
Technics  
Victor  
0145  
0420  
0420,0393,0174,0180  
0029,0303  
0072  
Wards  
Yamaha  
Yorx  
0157,0053  
0036,0187,0888  
0461  
Setup Codes For DAT (Digital Audio Tape) Recorders:  
Carver  
0158  
0158  
0158  
0158  
0158  
Harman/Kardon  
Magnavox  
Marantz  
Philips  
Setup Codes For DVD Players:  
Aiwa  
0641  
Apex  
0672  
Denon  
Emerson  
Fisher  
0490,0634  
0591  
0670  
GE  
GPX  
0522,0717  
0769  
GoVideo  
Gradiente  
Harman/Kardon  
Hitachi  
Hiteker  
JVC  
Kenwood  
Konka  
Magnavox  
Marantz  
Mitsubishi  
Onkyo  
Optimus  
Oritron  
Panasonic  
Philips  
Pioneer  
Princeton  
Proscan  
RCA  
0715  
0651  
0582  
0573,0664  
0672  
0558,0623  
0534,0682  
0711,0719,0720,0721  
0503,0675  
0539  
0521  
0503,0627  
0571  
0651  
0490,0632  
0503,0539  
0525,0571,0632  
0674  
0522  
0522,0571,0704,0717  
0573  
0670  
Samsung  
Sanyo  
continued on next page...  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUFACTURER’S CODES (continued)  
Setup Codes For DVD Players:  
Sharp  
0630  
Sherwood  
Sony  
0633  
0533  
Technics  
Techwood  
Theta Digital  
Toshiba  
Yamaha  
Zenith  
0490  
0692  
0571  
0503  
0490,0545  
0503,0591  
Setup Codes For Home Automation:  
GE  
0240  
0167  
0240  
0167  
0167  
0167  
One For All  
RadioShack  
Security System  
Universal X10  
X10  
Setup Codes For LD (Laser Disc) Players:  
Denon  
Mitsubishi  
NAD  
Optimus  
Pioneer  
0059  
0059  
0059  
0059  
0059  
Setup Codes For Misc. Audio Services:  
Jerrold  
Scientific Atlanta  
Starcom  
0459,0520  
0460  
0459  
Setup Codes For Satellite Receivers:  
AlphaStar  
Chaparral  
Echostar  
Expressvu  
GE  
0772  
0216  
0775,1005  
0775  
0566  
General Instrument  
HTS  
0869  
0775  
Hitachi  
0819  
Hughes Network Sys.  
JVC  
0749,1142,1749  
0775  
Magnavox  
0724,0722  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memorex  
Mitsubishi  
Next Level  
Panasonic  
Philips  
0724  
0749  
0869  
0701,0247  
0749,0724,0722,1076,1142  
Proscan  
RCA  
0392  
0566,0143,0392,0855  
RadioShack  
Samsung  
Sony  
0869  
1109  
0639  
Star Choice  
Toshiba  
Uniden  
0869  
0749,0790  
0724,0722  
0856  
Zenith  
Setup Codes For TVs:  
AOC  
0030,0019  
Admiral  
Aiko  
0093,0463  
0092  
Aiwa  
0701  
Akai  
0030  
Alaron  
0179  
Ambassador  
America Action  
Ampro  
0177  
0180  
0751  
Anam  
0180  
Audiovox  
Baysonic  
Belcor  
0451,0180,0092,0623  
0180  
0019  
Bell & Howell  
Bradford  
Brockwood  
Broksonic  
CXC  
0154,0016  
0180  
0019  
0236,0463  
0180  
Candle  
Carnivale  
Carver  
0030,0056  
0030  
0054  
Celebrity  
Cineral  
Citizen  
Concerto  
Contec  
0000  
0451,0092  
0060,0030,0056,0092  
0056  
0180  
Craig  
0180  
Crosley  
Crown  
0054  
0180  
Curtis Mathes  
0047,0054,0154,0051,0451,0093,0060,0030,0145,0056,  
0016,0166,0466,0747,1147,1347  
Daewoo  
0451,0019,0092,0623,0624  
continued on next page...  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUFACTURER’S CODES  
Setup Codes For TVs (continued):  
Daytron  
Denon  
0019  
0145  
Dumont  
Dwin  
0017,0019  
0720,0774  
Electroband  
Emerson  
Envision  
Fisher  
0000  
0154,0236,0463,0180,0178,0019,0179,0177,0623,0624  
0030  
0154  
Fujitsu  
0179,0683  
Funai  
0180,0179,0171  
Futuretech  
GE  
0180  
0047,0051,0451,0093,0178,0021,0747,1147,1347  
Gibralter  
GoldStar  
Gradiente  
Grunpy  
Hallmark  
Harley Davidson  
Harman/Kardon  
Harvard  
Hitachi  
Infinity  
Inteq  
0017,0030,0019  
0030,0178,0019,0056  
0053,0056  
0180,0179  
0178  
0179  
0054  
0180  
0145,0056,0016,0151  
0054  
0017  
JBL  
0054  
JCB  
0000  
JVC  
0053  
KEC  
0180  
KTV  
0180,0030  
Kenwood  
Konka  
0030,0019  
0628,0632,0638,0703,0707  
LG  
0056  
LXI  
0047,0054,0154,0156,0178,0747  
Logik  
0016  
Luxman  
MGA  
0056  
0150,0030,0178,0019  
MTC  
0060,0030,0019,0056  
Magnavox  
Majestic  
Marantz  
Matsushita  
Megatron  
Memorex  
Midland  
Minutz  
Mitsubishi  
Motorola  
0054,0030,0179,1254  
0016  
0054,0030  
0250  
0178,0145  
0154,0250,0463,0150,0178,0179,0056,0016  
0047,0017,0051,0747  
0021  
0093,0150,0178,0019  
0093  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multitech  
NAD  
NEC  
0180  
0156,0178,0166  
0030,0019,0056  
0092  
NTC  
Nikko  
Onwa  
0030,0178,0092  
0180  
Optimus  
Optonica  
Orion  
Panasonic  
Penney  
0154,0250,0166  
0093  
0236,0463,0179  
0051,0250  
0047,0156,0051,0060,0030,0178,0021,0019,0056,0747,  
1347  
Philco  
Philips  
Pilot  
Pioneer  
Portland  
Princeton  
Prism  
0054,0463,0030,0145,0019  
0054  
0030,0019  
0166,0679  
0019,0092  
0717  
0051  
Proscan  
Proton  
Pulsar  
Quasar  
RCA  
0047,0747  
0178,0466  
0017,0019  
0051,0250  
0047,0051,0093,0019,0090,0679,0747,1047,1147,1247,  
1347,1447  
RadioShack  
Realistic  
Runco  
0047,0154,0180,0030,0178,0019,0056,0747  
0154,0180,0030,0178,0019,0056  
0017,0030,0603  
SSS  
0180,0019  
Sampo  
Samsung  
Sansei  
0030  
0060,0030,0178,0019,0056  
0451  
Sansui  
0463  
Sanyo  
0154  
Scimitsu  
Scotch  
0019  
0178  
Scott  
0236,0180,0178,0019,0179  
Sears  
0047,0054,0154,0156,0178,0179,0056,0171,0747  
Semivox  
Semp  
0180  
0156  
Sharp  
0093,0688  
Shogun  
Signature  
Sony  
0019  
0016  
0000  
Soundesign  
Squareview  
Starlite  
Supreme  
Sylvania  
0180,0178,0179  
0171  
0180  
0000  
0054,0030  
continued on next page...  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUFACTURER’S CODES  
Setup Codes For TVs (continued):  
Symphonic  
TMK  
0180,0171  
0178,0056,0177  
TNCi  
0017  
Tandy  
0093  
Technics  
Technol Ace  
Techwood  
Teknika  
0051,0250  
0179  
0051,0056  
0054,0180,0150,0060,0019,0179,0056,0016,0092  
Telefunken  
Toshiba  
0056  
0154,0156,0060,1256  
Vector Research  
Victor  
0030  
0053  
Vidikron  
Vidtech  
0054  
0178,0019  
Wards  
White Westinghouse  
Yamaha  
0054,0030,0178,0021,0019,0179,0056,0016  
0463,0623,0624  
0030,0019  
Zenith  
0017,0463,0016,0092,0624  
Setup Codes For TV/VCR Combos:  
Broksonic  
Citizen  
0002,0479 (for TV use 0463)  
0278  
Colt  
0072  
Curtis Mathes  
Daewoo  
Emerson  
0035 (for TV use 0051)  
0278 (for TV use 0624)  
0002,0278 (for TV use 0624),0294 (for TV use 0236),  
0479 (for TV use 0463)  
Funai  
GE  
0000  
0035 (for TV use 0051),0048 (for TV use 0093),  
0060 (for TV use 0047),0240  
GoldStar  
Harley Davidson  
Hitachi  
0037 (for TV use 0056)  
0000  
0000  
Lloyds  
0000  
Magnasonic  
Magnavox  
Magnin  
0278,0563  
0000,0081 (for TV use 0054)  
0240  
Memorex  
MGA  
0037,0162 (for TV use 0250),1037,1162,1262  
0240  
Mitsubishi  
Optimus  
Orion  
0048 (for TV use 0093)  
0162 (for TV use 0250),1162,1262  
0000,0479 (for TV use 0463)  
Panasonic  
0035 (for TV use 0051),0162 (for TV use 0250),1162,  
1262  
Penney  
Quasar  
0035 (for TV use 0051),0037 (for TV use 0056),0240  
0035 (for TV use 0051),0162 (for TV use 0250)  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUFACTURER’S CODES  
Setup Codes For TVs (continued):  
Symphonic  
TMK  
0180,0171  
0178,0056,0177  
TNCi  
0017  
Tandy  
0093  
Technics  
Technol Ace  
Techwood  
Teknika  
0051,0250  
0179  
0051,0056  
0054,0180,0150,0060,0019,0179,0056,0016,0092  
Telefunken  
Toshiba  
0056  
0154,0156,0060,1256  
Vector Research  
Victor  
0030  
0053  
Vidikron  
Vidtech  
0054  
0178,0019  
Wards  
White Westinghouse  
Yamaha  
0054,0030,0178,0021,0019,0179,0056,0016  
0463,0623,0624  
0030,0019  
Zenith  
0017,0463,0016,0092,0624  
Setup Codes For TV/VCR Combos:  
Broksonic  
Citizen  
0002,0479 (for TV use 0463)  
0278  
Colt  
0072  
Curtis Mathes  
Daewoo  
Emerson  
0035 (for TV use 0051)  
0278 (for TV use 0624)  
0002,0278 (for TV use 0624),0294 (for TV use 0236),  
0479 (for TV use 0463)  
Funai  
GE  
0000  
0035 (for TV use 0051),0048 (for TV use 0093),  
0060 (for TV use 0047),0240  
GoldStar  
Harley Davidson  
Hitachi  
0037 (for TV use 0056)  
0000  
0000  
Lloyds  
0000  
Magnasonic  
Magnavox  
Magnin  
0278,0563  
0000,0081 (for TV use 0054)  
0240  
Memorex  
MGA  
0037,0162 (for TV use 0250),1037,1162,1262  
0240  
Mitsubishi  
Optimus  
Orion  
0048 (for TV use 0093)  
0162 (for TV use 0250),1162,1262  
0000,0479 (for TV use 0463)  
Panasonic  
0035 (for TV use 0051),0162 (for TV use 0250),1162,  
1262  
Penney  
Quasar  
0035 (for TV use 0051),0037 (for TV use 0056),0240  
0035 (for TV use 0051),0162 (for TV use 0250)  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RadioShack  
RCA  
1037  
0035 (for TV use 0051),0048 (for TV use 0093),  
0060 (for TV use 0047),0240  
Sansui  
Sanyo  
0000,0479 (for TV use 0463)  
0240  
Sears  
Sharp  
Sony  
Sylvania  
Symphonic  
Thomas  
White Westinghouse  
Zenith  
0000,0037 (for TV use 0056)  
0048 (for TV use 0093)  
0000,0032 (for TV use 0000)  
0081 (for TV use 0054)  
0000,0563  
0000  
0278 (for TV use 0624)  
0000,0637 (for TV use 0624)  
Setup Codes For VCRs:  
Admiral  
Adventura  
Aiko  
0048,0209  
0000  
0278  
Aiwa  
0037,0000  
Akai  
0041  
America Action  
American High  
Asha  
0278  
0035  
0240  
Audiovox  
Beaumark  
Bell & Howell  
Broksonic  
CCE  
0037  
0240  
0104  
0184,0121,0209,0002,0479  
0072,0278  
Calix  
0037  
Canon  
0035  
Carver  
0081  
Cineral  
0278  
Citizen  
0037,0278  
Colt  
0072  
Craig  
0037,0047,0240,0072  
Curtis Mathes  
Cybernex  
Daewoo  
Denon  
0060,0035,0041,0162,0760  
0240  
0045,0278  
0042  
Dynatech  
Electrohome  
Electrophonic  
Emerex  
Emerson  
Fisher  
0000  
0037  
0037  
0032  
0037,0184,0000,0121,0043,0209,0002,0278,0479  
0047,0104  
Fuji  
0035,0033  
Funai  
0000  
GE  
0060,0035,0048,0240,0760  
continued on next page...  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUFACTURER’S CODES  
Setup Codes For VCRs (continued):  
Garrard  
0000  
GoVideo  
GoldStar  
Gradiente  
HI-Q  
0432  
0037,0038  
0000  
0047  
Harley Davidson  
Harman/Kardon  
Harwood  
Hitachi  
0000  
0081,0038  
0072  
0000,0042,0041  
Hughes Network Sys.  
JVC  
0042  
0067,0041  
Jensen  
0041  
KEC  
0037,0278  
KLH  
0072  
Kenwood  
Kodak  
0067,0041,0038  
0035,0037  
LXI  
0037  
Lloyds  
0000  
Logik  
0072  
MEI  
0035  
MGA  
0240,0043  
MGN Technology  
MTC  
0240  
0240,0000  
Magnasonic  
Magnavox  
Magnin  
0278  
0035,0039,0081,0000,0149,0563  
0240  
Marantz  
Marta  
0035,0081  
0037  
Matsushita  
Memorex  
0035,0162  
0035,0037,0048,0039,0047,0240,0000,0104,0209,0162,  
0479,1037,1162,1262  
Minolta  
Mitsubishi  
Motorola  
Multitech  
NEC  
0042  
0048,0067,0043  
0035,0048  
0000,0072  
0104,0067,0041,0038  
Nikko  
0037  
Noblex  
Olympus  
Optimus  
Orion  
0240  
0035  
0037,0048,0104,0162,0432,1048,1062,1162,1262  
0184,0209,0002,0479  
Panasonic  
Penney  
Pentax  
0035,0162,0225,0616,1062,1162,1262,1362  
0035,0037,0240,0042,0038  
0042  
Philco  
0035,0209,0479  
Philips  
Pilot  
0035,0081,0618,1081,1181  
0037  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pioneer  
Polk Audio  
Profitronic  
Proscan  
Protec  
0067  
0081  
0240  
0060,0760  
0072  
Pulsar  
0039  
Quasar  
0035,0162,1162  
RCA  
0060,0035,0048,0240,0042,0149,0760  
RadioShack  
Radix  
0000,1037  
0037  
Randex  
Realistic  
ReplayTV  
Runco  
0037  
0035,0037,0048,0047,0000,0104  
0614,0616  
0039  
STS  
0042  
Samsung  
Sanky  
0240,0045  
0048,0039  
Sansui  
0000,0067,0209,0041,0479  
Sanyo  
0047,0240,0104  
Scott  
0184,0045,0121,0043  
Sears  
0035,0037,0047,0000,0042,0104  
Semp  
0045  
Sharp  
0048  
Shintom  
Shogun  
Singer  
0072  
0240  
0072  
Sony  
0035,0032,0000,0033,0636,1032  
Sylvania  
Symphonic  
TMK  
0035,0081,0000,0043  
0000  
0240  
Tatung  
0041  
Teac  
0000,0041  
0035,0162  
0035,0037,0000  
0000  
0618,0636  
0045,0043  
0037,0240  
0240  
Technics  
Teknika  
Thomas  
Tivo  
Toshiba  
Totevision  
Unitech  
Vector  
0045  
Vector Research  
Video Concepts  
Videosonic  
Wards  
0038  
0045  
0240  
0060,0035,0048,0047,0081,0240,0000,0042,0072,0149,  
0760  
White Westinghouse  
XR-1000  
Yamaha  
0209,0072,0278  
0035,0000,0072  
0038  
Zenith  
0039,0000,0209,0033,0479  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUFACTURER’S CODES (continued)  
Setup Codes For Video Accessories:  
Archer  
GC Electronics  
Jebsee  
Magnavox  
Panasonic  
Philips  
0160  
0160  
0160  
0818  
1120  
0818  
1010  
0160  
1126  
1010  
0850  
Pioneer  
RadioShack  
Sensory Science  
Sharp  
Sony  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Napoleon Fireplaces Indoor Fireplace Savoy User Manual
National Instruments Graphics Tablet NI 5620 User Manual
NETGEAR Network Router WG602 User Manual
Nokia Cell Phone 2160 User Manual
Omega Network Card 208H User Manual
Oster Toaster TSSTTRDFL1 User Manual
Ozaki Worldwide Portable Speaker Dotadot101 User Manual
Panasonic Computer Monitor CF 08 User Manual
Panasonic Laptop CF W7Mk3 User Manual
Paradyne Network Router 6212 I1 User Manual